Tubing and Capillaries
PEEK Sample Loops
Applied Research PEEK sample loops with volumes of up to 20 μl are manufactured of tubing with the
closest tolerance (OD and ID: +/-0.025 mm) available on the market, the UltraT-PEEK tube,
which guarantees the smallest volume deviation possible.
The tolerances for tubing used for all other sample loops is OD and ID are +/-0.05 mm.
We offer sample loops with other volumes on request.
|
|
| Volume | Capillary ID | Cheminert/Rheodyne | VICI Valco |
|---|
| 1 μl | 0.064 mm | 41.001.006-10.1 | 41.001.006-10.2 |
| 2 μl | 0.064 mm | 41.002.006-10.1 | 41.002.006-10.2 |
| 5 μl | 0.18 mm | 41.005.018-12.1 | 41.005.018-12.2 |
| 10 μl | 0.25 mm | 41.010.025-13.1 | 41.010.025-13.2 |
| 20 μl | 0.25 mm | 41.020.025-13.1 | 41.020.025-13.2 |
| 50 μl | 0.50 mm | 41.050.050-14.1 | 41.050.050-14.2 |
| 100 μl | 0.50 mm | 41.100.050-14.1 | 41.100.050-14.2 |
| 250 μl | 0.75 mm | 41.250.075-15.1 | 41.250.075-15.2 |
| 500 μl | 0.75 mm | 41.500.075-15.1 | 41.500.075-15.2 |
| 1000 μl | 0.75 mm | 41.1000.075-15.1 | 41.1000.075-15.2 |
Note: Tolerances and pressure stability for PEEK tubing and capillaries is as described in the PEEK capillary section.
 |
SS Sample Loops
Tolerances for SS tubing and capillaries are +/- 0.025mm for both OD and ID.
All of Applied Research SS tubing is welded and annealed. The tubing is tested according to EN 10204/3.1B. Applied Research SS tubing is cut using EDC (electronic discharge) techniques
to achieve square and burr-free end for zero-dead volume connections.
We offer sample loops with different volumes on request.
|
| Volume | Capillary ID | Cheminert/Rheodyne | VICI Valco |
|---|
| 5 μl | 0.18 mm | 46.005.018-02.1 | 46.005.018-02.2 |
| 10 μl | 0.25 mm | 46.010.025-03.1 | 46.010.025-03.2 |
| 20 μl | 0.25 mm | 46.020.025-03.1 | 46.020.025-03.2 |
| 50 μl | 0.50 mm | 46.050.050-04.1 | 46.050.050-04.2 |
| 100 μl | 0.50 mm | 46.100.050-04.1 | 46.100.050-04.2 |
| 250 μl | 0.75 mm | 46.250.075-05.1 | 46.250.075-05.2 |
| 500 μl | 0.75 mm | 46.500.075-05.1 | 46.500.075-05.2 |
| 1000 μl | 0.75 mm | 46.1000.075-05.1 | 46.1000.075-05.2 |
| 2 ml | 1.0 mm | 46.2000.100-06.1 | 46.2000.100-06.2 |
| 5 ml | 1.0 mm | 46.5000.100-06.1 | 46.5000.100-06.2 |